Devices
Add, monitor and manage your biometric devices, fix connection problems and remove devices safely.
Add a device
- Open Devices and choose Add Device.
- Choose ADMS Cloud Push or Ethernet LAN and fill in the same details as in Getting Started.
- Choose Connect & Register.
The header shows Capacity: X / Y Used against your licence. Duplicate IP addresses, serial numbers or names are not allowed.
Monitor devices
The devices table shows each device's connection mode, status (Online (ADMS), Online (Ethernet), Offline, Suspended), last sync, log capacity and firmware. Use the search box (name, IP or serial number) and the status filter to find a device.
Row actions:
- Sync Now pulls new punches; Sync Clock sets the device time.
- Edit Device changes the name, IP, port or Comm Key.
- Switch to Ethernet (TCP) / Switch to ADMS Cloud changes how it connects; GotIt tests the new mode and switches back if it fails.
- Terminal Diagnostics shows firmware, clock, and storage for users, fingerprints, faces and logs, and lets you play a voice prompt, trigger the door relay or reboot the device.
Fix a device that is offline
Choose Why Offline? or Test Connection. GotIt Desktop identifies the root cause and shows a checklist: power, network cable, Comm Key (default 0) and firewall. If the firewall blocks the port, copy the allow command shown (on Linux, Authorize runs it for you), then choose Re-test Diagnostics.
Remove a device
Removing a device takes two steps:
- Remove → Request Device Deletion: choose a reason (for example Hardware Replacement) and add details, then Submit for Admin Approval.
- Review Device Deletion Request: enter the 6-digit Admin PIN and choose Approve & Delete (or Reject / Restore Device).
Need a hand? Contact our team.