1. Home
  2. FAQs

Frequently asked questions

Pick a product, then a topic. Every answer here is published by the GotIt team.

Cloud HRM (8)

Can GotIt run across branches and remote sites?

Yes. GotIt supports multi-branch organizations with location geofencing, QR check-in, and centralized administrative controls.

Does GotIt support biometric devices without static IP?

Yes. Devices connect securely via ADMS outbound push over standard HTTPS without opening incoming ports or requiring static IP addresses.

I forgot my password or OTP is not working.

Password reset and OTP issues are usually resolved by requesting a fresh code and checking whether the registered email or phone number is still correct.

Key steps:
Use the password reset option and request a brand new OTP instead of reusing an older one.
Check spam or promotions folders if the OTP is sent by email.
Verify that the registered mobile number or email is still active and accessible.

My user account is blocked or inactive.

A blocked or inactive account usually means the user status, role mapping, or branch access was changed by an administrator.

Key steps:
Ask your admin to confirm that the user is active in the system.
Check whether role, branch, or module permissions were recently changed.
If you still cannot access the account, raise a ticket so the audit trail can be checked.

My biometric device is not syncing attendance.

Attendance sync issues usually come from network interruptions, device push settings, or employee mapping mismatches between the device and the application.

Key steps:
Check whether the device is online and reachable on the same configured network.
Verify that push mode, API endpoint, or middleware service is running properly.
Confirm that employee IDs on the device match the employee mapping inside the system.

Employees are unable to punch in or out.

Punch failures normally come from biometric mismatch, geo restrictions, shift timing rules, or app permissions on the user device.

Key steps:
Check whether face, fingerprint, GPS, camera, or app permissions are blocked on the employee device.
Verify that the employee is within allowed geo range and the shift window is open.
Test one employee manually to confirm whether the issue is user-specific or device-wide.

I need help with payroll, leave, or shifts.

Payroll, leave, and shift issues are usually caused by configuration gaps, policy mismatches, or date-effective rule changes.

Key steps:
Verify the employee policy, pay structure, leave setup, or shift assignment first.
Check whether the effective dates overlap with the current period.
Test one known employee record before applying broad changes.

Why can't I delete a payroll run?

A payroll run is locked once its payslips are published or paid, so salary records stay consistent.

Key steps:
Make corrections as adjustments in the next payroll run.
If a published run must change, raise a ticket so our team can help.

Desktop Gateway (11)

How does the desktop application connect to devices?

GotIt Desktop Gateway connects directly over your local office LAN using native protocol adapters, polling attendance logs reliably and pushing commands.

Can GotIt Desktop run offline when internet drops?

Yes. The desktop workstation buffers punches and logs in local SQLite/embedded storage and automatically synchronizes when connectivity is restored.

Which operating systems are supported for Desktop Gateway?

Native builds are provided for 64-bit Windows and Linux workstations with lightweight background daemon support.

How do I install GotIt Desktop?

GotIt Desktop runs on Windows and on Ubuntu, Debian or Linux Mint.

Key steps:
Windows: run GotIt-Workstation-Setup.exe and follow the installer.
Linux: run sudo dpkg -i gotit-workstation_amd64.deb, then sudo apt-get install -f.
If Windows says "Windows protected your PC", choose More info, then Run anyway, as long as the installer came from GotIt.
Open GotIt Desktop and choose Let's Get Started to activate your licence.

My licence has expired or shows an error.

When the licence expires, the Dashboard shows License Expired and background sync stops. Your biometric devices keep recording attendance in the meantime.

Key steps:
Choose Renew License Online to open the renewal page.
After paying, choose Verify License Status to refresh the licence.
To use a new key, choose Enter Different License Key.

I have reached my device, user or admin-seat limit.

Your licence sets how many users, devices and admin seats you can use. You can see the limits in Settings → System Info and on the Dashboard License Status tile.

Key steps:
Remove devices or users you no longer need.
Sign out of admin seats that are not in use.
Choose Upgrade License if you need more.

How do I add a biometric device?

Devices connect by ADMS Cloud Push or Ethernet LAN.

Key steps:
Open Devices and choose Add Device.
Choose ADMS Cloud Push or Ethernet LAN and enter the device details (IP, port, Comm Key).
Choose Connect & Register.
Each device needs its own IP address, serial number and name.

A device shows Offline or punches are not coming in.

Usually the device cannot reach this PC, or its ADMS address is not set to GotIt Desktop.

Key steps:
Check the device is powered on and on the same network.
For ADMS, copy the Local ADMS URL from the sidebar (Settings → Cloud Sync, default port 5050) into the device's ADMS or Cloud settings.
Choose Sync Now on the device row, and open the Live Console to see what the device sends.
If push does not work on your network, use Switch to Ethernet (TCP).

How do I add employees to a device?

Employees are written to the devices you choose, where they then register their fingerprint or face.

Key steps:
Open Employees and choose Add Employee.
Enter the Employee ID and Full Name, and a card number or password if needed.
Choose the device(s) to enrol on and select Add User.
Already have employees on a device? Choose the terminal and select Load from Device.

How do backups work?

Backups run twice a day, at 01:30 and 13:30, to a local folder or Google Drive. A missed backup runs the next time GotIt Desktop opens.

Key steps:
Open Settings → General and choose the backup destination.
Choose Run Manual Backup before a big change, such as moving to a new PC.
To restore, choose Restore Backup and pick a backup. A safety copy of your current data is kept.

I forgot the app passcode.

You can reset the passcode with your security questions.

Key steps:
On the lock screen choose Forgot PIN? Answer 3 Security Questions.
Answer them and set a new passcode.
If you cannot answer them, choose Request Assistance. Your administrator approves the reset and the new passcode is emailed to you.

Mobile / Device App (11)

How do employees mark attendance on mobile?

Employees use the GotIt mobile self-service app with verified geofencing, selfie/face match, or company QR check-in.

What happens if mobile network is unavailable during punch?

The mobile app securely queues encrypted offline check-ins with device tamper detection and syncs as soon as connectivity resumes.

Can managers review leave and overtime requests directly on mobile?

Yes. Department managers and HR administrators receive instant push notifications and can approve or reject requests with one tap.

Where can I get the GotIt Mobile app?

GotIt Mobile is for employees of companies on GotIt Cloud and is free with Cloud. It is coming soon to Google Play and the App Store. Key steps: Check with your admin that your company uses GotIt Cloud. Install the app from Google Play or the App Store once it is available. Sign in with the email or phone number your company registered for you.

I cannot sign in to the app.

Sign in with the email or phone number your company registered, using your password or an OTP.

Key steps:
Use the same email or phone number your company has on file.
If the OTP does not arrive, wait a minute and request a new one.
Ask your admin to check that your account is active.

The app says I am outside the office zone.

Geo punch only works inside the zone your company set for your office.

Key steps:
Turn on location and precise location on your phone.
Allow GotIt to use your location.
Wait a few seconds for a better GPS fix, ideally near a window or outdoors.
If you are inside and it still fails, ask your admin to check the office zone in Geo Mark.

The selfie check fails.

Some companies ask for a selfie with each punch. The face must be clear and well lit.

Key steps:
Allow GotIt to use the camera.
Face a light source and keep your whole face in the frame.
Remove a mask or dark glasses.
If it keeps failing, ask your admin to re-enrol your face.

My punch is not showing in attendance.

Punches need an internet connection to reach your company.

Key steps:
Check your mobile data or Wi-Fi.
Pull down to refresh the attendance screen.
If it is still missing, ask your admin to check or regularise the day.

How do I apply for leave?

You can apply for leave and track it in the app.

Key steps:
Open Leave and choose to apply.
Pick the leave type and dates, and add a reason.
Submit, then follow the status in Leave. Holidays are listed there too.

I cannot see my payslip.

A payslip shows once your company publishes payroll for that month.

Key steps:
Open Payroll and choose the month.
If the month is missing, ask HR whether payroll for it has been published.

I am not getting notifications.

Notifications need permission and must not be blocked by battery saving.

Key steps:
Allow notifications for GotIt in your phone settings.
Turn off battery restrictions for GotIt.
Sign out and sign in again.

Still have a question?

Book a demo or ask the team; we answer the same day.

Talk to us